1Product 2Options 3Services 4Quote

Storage tent T825

Storage tent T825

From  7.665,00 (ex. VAT) 9.274,65 (incl. VAT)7665

In stock

From  7.665,00 (ex. VAT) 9.274,65 (incl. VAT)7665

Customize your product:

Storage tent T825
Download product sheet
790 cm
2.500 cm
240 cm (side), 420 cm (ridge)
Maximum snow load
0,50 kN / m² If necessary, the storage tent can also be built in areas with a higher snow load if you can ensure that the 50 kg / m² limit is not exceeded (for example, by heating the tent in winter or clearing the roof from snow).
Maximum wind load
0,30 kN/m² (EN13782, temporary construction)
Fabric door (included)
240 x 390 cm (H x W), manual roll up
- HDPE: white - PVC: white or dark green
Average assembly time for DIY with 4 persons
3 days
Steel structure
Steel S355JO, electrolytically galvanised, main profiles ∅76 x 2 mm
HDPE 300 g/m² - Tensile strength warp: 1351 N - Tensile strength weft: 1195 N - Tear resistance warp: 167 N - Tear resistance weft: 137 N - Flame retardant: according to CPAI-84:1995 - Temperature resistance: -30 - +70 °C PVC 610 g/m² - Tensile strength warp: 2965 N - Tensile strength weft: 2282 N - Tear resistance warp: 456 N - Tear resistance weft: 314 N - Flame retardant: according to DIN 4102-1 class B2 - Temperature resistance: -30 - +70 °C
With use of earth anchors (included)
Shipping weight and dimensions (L x W x H)
1.500 kg, 2 crates - 295 x 75 x 230 cm (steel structure) - 230 x 75 x 35 cm (fabric)
Construction drawings, structural calculations in accordance with EUROCODE and assembly manuals are included free of charge.
Steel structure: 10 years descending warranty against rust perforation Fabric: - HDPE: 3 years descending warranty - PVC: 10 years descending warranty Doors: 1 year mechanical warranty
- PVC fabric in white or dark green in stead of white HDPE - 1 or 2 man doors
Download product sheet

The PE fabric complies with the CPAI-84-1995 standard, the PVC fabric complies with the DIN 4102-1 class B2 standard. (view the certificates on the download page)

A PE fabric is only available in white. For PVC you can choose between green and white. PE is not available in green because the lifespan of a green PE fabric is considerably shorter than white.

As standard the storage tent is delivered with earth anchors. If you wish to place the tent on a concrete surface, you can order concrete anchors.

No, this is not possible. We only sell standard storage tents.

You can only choose one or more man doors for the T500 and the T1220. For the T1220 these can be placed both at the front and the back as well as in the side walls. In the T500 the man door only fits in the front or the back. The man door is made of polyester sandwich panel and has an aluminium inner frame. You can choose one or more man doors on the product page in question under “Customize product”.

No, this isn’t possible. We only sell standard storage tents.

In the product specifications you will find the maximum wind and snow load as described in the official structural calculations. We recommend that you only place the product in wind and snow zones that do not exceed these standards. If you nevertheless choose to install the storage building or tent in a region with higher maximum wind and snow loads, please bear in mind that this is at your own risk.

The PVC fabric is stronger than PE (i.e. polyester or HDPE) and is therefore more resistant to weather effects. PVC has a longer lifespan. We have a 10-year descending warranty on PVC. The warranty on PE is 3 years.

Of all our storage buildings, storage tents and container shelters we have structural calculations available in German. These are available on request and free of charge.

For these structural calculations we work with German engineers. These structural calculations always meet the ′Eurocode′ standard supplemented by German codes DIN+DIBt ensuring wide European and International acceptance. To maintain the legal status, we only provide the original untranslated documents in the German language. Should this cause you any difficulties, you can use these documents as a basis to ask a local engineer to draw up a structural calculation in your own language which meets your local requirements.

That depends on the product and the local regulations. A permit is usually not necessary for temporary placement. For (semi) permanent placements, it’s best to contact your municipality.

You can download the construction drawings to apply for a building permit. Upon request we can also supply the structural calculations entirely free of charge and obligation.

To guarantee fast and trouble-free assembly, we make the inspection and assembly conditions mandatory for customers who have the product assembled by our own assembly team. However, the instructions mentioned in the document naturally also apply to do-it-yourself assembly. We strongly advise you to follow this so that you will not be faced with any surprises during assembly.