Warehouse tent 6m wide
The Kroftman warehouse tents combine the best of two worlds. With a steel frame, Corrugated galvanised steel metal sheeting and a roof made of PVC canvas, it is as strong and burglar-resistant as a storage building and as easy to disassemble as a storage tent. It’s the ideal solution if you’re looking for a semi-permanent storage area which retains its value, even after dismantle and reassembly.
Customize your storage tent
|Length||WT609: 869 cm|
WT612: 1156 cm
WT615: 1442 cm
WT618: 1729 cm
WT621: 2016 cm
Do you need a larger size? The WT600 warehouse tent can be extended with a multiple of 286 cm.
|Height||331 cm (shoulder)|
412 cm (top)
|Maximum snow load||1,3kN/m²|
in combination with 0,65kN/m² wind load
|Maximum wind load||0,65kN/m²|
in combination with 1,3kN/m² snow load
|Roll-up door (included)||305 x 275 cm (H x W), headway 295 cm, color RAL 9003 (signal white), including clutching for padlock (not included)|
|Sheeting||Corrugated galvanised steel metal. High tensile steel 550 MPa, 0,5 mm S280GD (NEN-EN 10169)|
|Steel construction||Galvanized steel S390, c-profile, thickness 1,5 mm, truss distance 2865 mm.|
|Fabric roof||PVC 610 gr/m²|
|Shipping weight and sizes (LxWxH)||WT609: 1630 kg, 350 x 120 x 100 cm|
A warehouse tent which retains its value
The warehouse tent is very suitable as a temporary workspace, warehouse or garage. If you no longer need the tent, it’s easy to store or relocate.
Compared to a steel storage building, the warehouse tent can be disassembled very quickly and virtually without damage. This allows it to be relocated multiple times without problems or resold with a high residual value.
The construction of the warehouse tent is such that you can easily extend it with (multiples of) 2,86 meters. If you in the course of time need a larger surface area, you can order one or more extra lengths and easily attach these to the existing tent.
Do you need less space? Then you can easily shorten the warehouse tent by disassembling a construction element and moving the back wall forward.
Inexpensive top performance
The frame of the warehouse tent is made of cold-formed C section steel. This has two important advantages compared to a warehouse tent with an aluminium frame. The construction is stronger (higher snow load) and the material is cheaper. Yet, the frame of our warehouse tent weighs roughly as much as a warehouse tent with an aluminium frame.
The warehouse tent can bear a snow load of no less than 130 kg of snow per square meter. This means that the tent is suitable for a permanent building permit in virtually all of Europe. Other warehouse tents with similar prices have a considerably lower snow and wind load.
The structural calculations of our warehouse tent are made by an independent German engineering firm. You can request these entirely free of charge and obligation.
For any type of foundation
The warehouse tent can be used for many purposes. If you only need the tent for a few months, an anchoring with earth anchors is probably sufficient.
If you’re looking for a multi-year solution, you have the same unique anchoring possibilities as our steel storage buildings. You don’t need an expensive concrete foundation; the warehouse tent can be placed on any type of solid foundation.Read more about the anchoring options