Width
1009 cm
(=Outer dimension including metal sheeting)
(+32 cm including rain gutters)
Length
1.330 cm

(=Outer dimension including metal sheeting)

Height
407 cm (side), 543 cm (ridge)
Unobstructed floor space
950 x 1.280 cm ≈ 120 m²
Roofpitch
15˚
Maximum snow load
1,3 kN/m²
in combination with 0,85 kN/m² wind load

DIN EN 1991-1-3:2010-12 and DIN EN 1991-1-3/NA:2010-12 compliant

Maximum wind load
0,85 kN/m²
in combination with 1,3 kN/m² snow load

DIN EN 1991-1-3:2010-12 and DIN EN 1991-1-3/NA:2010-12 compliant

Overhead door
415 x 318 cm (H x W), color RAL 9002 (grey white), including latch for padlock (padlock not included). Cannot be opened from outside.
The door consists of sandwich panels with a thickness of 4 cm. The outside has a micro-profile, the inside is horizontally profiled. Running rails of galvanized steel. Galvanized door fittings. Steel cables with six-fold safety. Spring package is suitable for a minimum of 30,000 door movements. EPDM seals around and between the panels.
Electric opener overhead door (optional)
220V drive unit + 2x remote control + complete installation set
Man door (included)
Opening dimensions 209 x 93 cm, color RAL 9002 (grey white), including door handle with backplate and integrated lock (1 key, prepared for 17mm cilinder). All-steel door with rock wool filling, sheet thickness 0.9 mm, with four-sided EPDM sealing rubbers. Direction of rotation can be executed both left and right.
Door positions
The storage building comes standard with an overhead door and a man door in the front wall. Other door positions are possible, taking into account:
1) An overhead door opening occupies the full width of a truss section in a side wall. The total door construction (including shafts) is therefore wider than a truss section.
2) An overhead door opens by means of rails that hang horizontally in the space, so that the guide rails can interfere with each other with certain door position combinations.
Metal sheeting
– Roof panel: profiled sandwich panel. Insulant: PIR (NEN-EN14509)
– Wall panel: profiled sandwich panel. Insulant: PIR (NEN-EN14509)

Polyester coating thickness 25 μm , maintenance free. Inner side wall panels RAL 9002 (grey white).

For the outside of the roof panels you can choose between the colors RAL 9002 (grey white) and 7016 (anthracite grey).
For the outside of the wall panels you can choose between the colors RAL 9006 (white aluminium), 7038 (agate grey) and 7016 (anthracite grey)*

*Colors can slightly differ from reality.

Skylights
6 insulated polycarbonate skylight panels. Only available for thickness 40 mm. Dimensions 524 x 110 cm per panel.
Steel structure
Galvanized steel S390, c-profile, thickness 2,0 / 2,5 mm, truss distance 3,3 meter.
Gutter system (optional)
Set of steel roof gutters and downspouts in the colors Aluzinc or RAL 7016 (anthracite), width of gutter 125 mm, diameter of downspout 80 mm.
Anchoring
For a permanently installed building
Option 1. Concrete foundation
Concrete (strip) foundation to be prepared according to Kroftman drawings (included). Base rail of building is bolted with concrete anchors (Not included). The concrete surface needs to be perfectly straight to obtain a watertight joint of the walls. (Tolerance plus or minus 5 mm)

Option 2. Prefab concrete slab elements
Construct a sandbed of 45 cm minimum (to the frost line) containing a spacious floor of prefab concrete panels (concrete slab elements) of 16 cm minimum. The soil profiles of the storage building need to be fastened with concrete anchors (Not included).

This option is economical and fast.

For temporarily or semi-permanently installed building
Option 3. Earth anchors
Earth anchors 1.200 x ∅25 mm for anchoring on pavement, asphalt or hard gravel. The installation surface must be straight without a slope. Base rail holes of ∅30 mm are to be drilled on-site. (adequate holesaw is included).

Installation of your steel building with earth anchors saves time and money and is the perfect solution when only temporily constructions are allowed or needed.

Average assembly time for DIY with 4 persons
4 days

Some parts need to be made to fit on-site.

Shipping weight and dimensions (L x W x H)
6.820 kg, 550 x 120 x 170 cm (9 pallets)
Documentation
Construction drawings, structural calculations in accordance with EUROCODE and assembly manuals are included free of charge.
Warranty
Metal sheeting and gutter system:
10 years descending warranty against rust perforation and discoloration

Steel structure:
10 years descending warranty against rust perforation

Skylights:
10 years descending warranty against breakage

Doors:
10 years descending warranty against rust perforation and discoloration, 1 year mechanical warranty. Electric opener: 2 years or 5.000 cycles

Assembly:
6 months warranty on correction installation of the supplied materials if assembled by Kroftman (or its partners).

Montage:
6 Monate Garantie auf die korrekte Installation der gelieferten Materialien, wenn diese von Kroftman (oder seinen Partnern) durchgeführt wird.

Options
– Electric opener (including 2 remote controls)
– Gutter system in the colors Aluzinc or RAL 7016 (anthracite grey)
– Man doors
– Overhead door in back wall
– Overhead door in the side walls 300 x 274 cm (H x W)